Table of Contents
Advertisement
RAM Module Installation:
1. Pull the white plastic tabs on each side of the slot away from the slot.
2. Match the notch on the button of the RAM module with the corresponding pattern in the DIMM
slot. This ensures that the module is inserted properly.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module
snaps into place.
4. Repeat steps 1、2 and 3 for the remaining RAM modules.
* The pictures above are for reference only and may vary slightly for your mainboard.
Before Overclocking
Please make sure your system components are capable of
overclocking. If you are not familiar with the overclocking, we
strongly recommend that you to set the clock to the default
settings.
11
KM400A Series
Advertisement
Table of Contents
