Paper Source
Duplex Print Mode
ADVANCED OPERATION GUIDE
Use to set the Paper Source to be selected first.
1
Display the Paper Handling screen, refer to Access the Paper Handling
Screen, on page 2-44.
2
Press
Select and press [Enter].
3
Press
source and press [Enter].
4
Press [Reset]. The Printer Basic screen displays.
Use to set the binding position on finished prints for duplex printing.
Setting
Short Edge Bind
Binding at a short edge
Long Edge Bind
Binding at a long edge
NOTE:
This setting is displayed only if the optional Duplex Unit is
installed.
or
to select Feed
or
to select the paper
Binding position
Printer Settings
Paper Handling
Back
Bypass Mode
Feed Select
Feed Select
Back
Bypass
Cassette 1
2-45