Olivetti d-Copia 200MF Advanced Information page 85

Access the Copy Default Screen
ADVANCED OPERATION GUIDE
Use the following procedure to access the Copy Default screen.
1
Press [System Menu / Counter].
2
Press or to select Copy
default and press [Enter].
3 Use the keypad to enter the 4 digit
management code.
NOTE:
The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For further information
refer to Administrator Management Code Change, on page 3-25.
If the code is accepted, the Copy
Default screen displays.
4
Change the options to the default settings required using the instructions
starting on page 3-4.
NOTE:
An * (asterisk) against a setting indicates the current setting.
System Settings
System Menu / Counter:
Print Report
Job Accounting
Copy Default
Enter Pin Code using # key.
Copy Default:
End
Exposure Mode
Orig Quality
:
Manual
:Text+Photo
3-3