Table of Contents
Advertisement
Running the Printer Set-Up Utility
This program runs under DOS. It should be used if the
feature you require cannot be selected through the driver
you have installed and you wish to modify your resident
printer parameters.
Use a good quality interface cable for your computer-
printer connection, to ensure correct communication
(ask your retailer for details).
Note for Windows® 95 users
If you have Windows® 95 installed on your PC, BEFORE
running the SETUP utility, you must disable the DOS
spooler, as follows:
1. In the Printers folder, select your printer then
Properties tab.
2. In the Details property sheet, click on the Port Settings
button.
3. A window entitled Configure LPT ports opens, with the
option Spool MS-DOS print jobs selected.
4. Click on the box, to disactivate the option. This will
enable the DOS application to handle the port directly.
5. Click OK.
6. Click OK in the Details property sheet.
To re-enable the "Spool MS-DOS print jobs" feature, just
repeat the above procedure.
4-6
To run the SETUP utility, proceed as follows:
1. Insert the diskette containing the SETUP utility in drive a
(usually) of your computer.
2. At the DOS prompt, type A:\ (or B:\)STUP150C.EXE,
and press ENTER.
3. The program will read the printer's identification code
and its internal settings. It will then display this
information on your PC screen.
4. If you click on Change Parameters, the parameter
group selection screen for the emulation currently
selected is displayed.
You can now select, one at a time, the parameter groups
containing the feature(s) you wish to change.
See also Appendix B for a complete list and description
of the parameters available.
5. If you click on Factory Default, you restore the default
settings.
6. If you click on Quit, you abandon the SETUP utility and
return to DOS. If any settings were changed, you will be
prompted to "Save setup into printer?".
The parameter settings defined in the driver and
common to the program always have priority over the
settings made using the SETUP utility.
Using Software
Advertisement
Table of Contents
