Removing The Superscript 150C Driver - NEC SuperScript 150C User Manual

If necessary, once you have completed the driver
installation , change this setting in your system
properties:
– right click on the My Computer icon,
– select Properties, then Device Manager,
– double click on Ports (COM&LPT),
– select Printer Port: LPTx.
If Ports (COM&LPT) does not offer a simple LPTx port
or if the selection of this port does not solve your
problem, you must change your PC setting. For further
information, see the "Installation" section in Chapter 5 -
"Troubleshooting" and the documentation supplied with
your PC.
8. Click Finish.
The installation of the driver files will start.
9. At the end of the installation, you will be asked to
remove the diskette and restart Windows®.
For more details on the printer driver, its parameters and
the printer setup, see Chapter 1 - "User Interface" and
Chapter 4 - "Using Software" in the User Guide or
consult your Windows® documentation.
12

Removing the SuperScript 150C Driver

G
Windows® 95:
1. From the Start button select Settings and Printers.
2. Click the NEC SuperScript 150C icon and select Delete
from File menu.
G
Windows® 3.1x
1. From the Main group select Printers.
2. Highlight NEC SuperScript 150C and click Remove.
3. Delete the following files from the Windows System
directory:
NE3CTRL.DLL, NE3DSPLR.EXE, NE3IMAGE.BMP,
NE3JNLIB.DLL, NE3PRST.DLL, NE3RASTR.DLL,
NE3SPMGR.EXE, NE3HLP.HLP, NE3RSC.DLL,
NE2LJP.DRV, NE2LJPLN.DLL, NE2HLP31.HLP.
Quick Start