Color
Print Head Selection:
Selects the color format to use
– Color
– Mono/Gray (Monochrome/Grayscale).
Image
– Brightness and Contrast (two sliding bars).
– Enable Ink Density Correction (enabled; click on box
to disable).
Adjusts the amount of ink to better match the
on-screen intensities.
Color Match
Disabled if Mono/Gray is selected in Print Head
Selection .
– Disabled (enabled; click on Disabled to disable)
– Use Driver's matching:
Match for business graphics
Match for photo images
Match for art and drawings
Bar shows Color Balance (Switches between color
matching and color balance options)
4-4
Color Balance
Disabled if Mono/Gray is selected in Print Head
Selection.
Four sliding bars:
– Saturation
Increase for richer colors, decrease for weaker
– Red Intensity
Adjusts the relative strength of the red
– Green Intensity
Adjusts the relative strength of the green
– Blue Intensity
Adjusts the relative strength of the blue
Bar shows Color Match (Switches between color
matching and color balance options)
Using Software