Removing The Speaker Assembly; Removing The Touch Pad - NEC Versa S940 Disassembly Manual

Removing the Speaker Assembly

To remove the Speaker Assembly, first remove the Main Board (see
Board) then perform the following steps:
1. Remove the screws holding Speaker Assembly as shown in Fig. 32
2. Carefully remove the Speaker assembly from Bottom Cover and place it aside.

Removing the Touch Pad

To remove the touch pad, first remove the top cover (see
perform the following steps:
1. Unscrew the screws on the Top Cover as shown in Fig. 33
2. Carefully separate the Touch Pad module from Top cover.
Fig. 32 Speaker Assembly
Fig. 33 Touch Pad
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the Main
Removing the Top Cover),
M2x4 Silver
then
A = M2x4 Silver
B = M2.5x2.5
Silver
Page 23