Removing The Top Cover - NEC Versa S940 Disassembly Manual

Removing the Top Cover

To remove the Top Cover , first remove the battery (see
HDD (see Removing the Hard Disk
Optical Disk Drive), remove the CPU (see
Removing the Keyboard) and remove the LCD Module (see
perform the following steps:
1. Remove all screws on the bottom of the base unit as shown in Fig. 25
2. Release two screws at the rear of system as shown in Fig. 26
Drive), remove the Optical Disk Drive (see
Fig. 25 Bottom Cover
Fig. 26 Rear view
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the
Removing the CPU)remove the Keyboard (see
Removing the LCD
Battery), remove the
Removing the
Module) then
A = M2.5x5 Black
B = M2.5x2.5
Silver
C= M2.5x6
Copper
D = M2.5x6 Silver
E = M2.5x8
Copper
M2.5x5 Black
Page 19