Removing The Optical Disk Drive - NEC Versa S940 Disassembly Manual

Removing the Optical Disk Drive

To remove the ODD, first remove the battery (see
Cover (see Removing Memory
1. Use pin to eject the optical drive via emergency eject hole as shown in Fig. 8
1. Pull the ODD module out from the base unit as shown in Fig. 9
Module) then perform the following steps:
Fig. 8 Eject the optical drive
Fig. 9 Pulling the optical drive out from the base unit
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the Battery) and Memory Module
Page 10