Removing The Touch Pad; Removing The Speaker Assembly - NEC Packard Bell EasyNote M5 Disassembly Manual

Removing the Touch Pad

To remove the touch pad, first remove the Main Board (see
then perform the following steps:
1. Unscrew the screws on the Touch Pad assembly as shown in Fig. 42 and remove
the touch pad assembly from the Top cover.
Fig. 42 Touch Pad

Removing the Speaker Assembly

To remove the Speaker assembly, first remove the Main Board (see
Board), then perform the following steps:
1. Remove the screws holding Audio Board holder as shown in Fig. 43
Fig. 43 Screw at Audio Board Holder
2. Carefully remove the Speaker assembly from bottom base and place it aside.
Packard Bell EasyNote M5/M7 Disassembly Manual
Removing the Main Board),
Removing the Main
M2x3 black
M2x3.5 black
26