Removing The Lcd Module - NEC Versa S940 Disassembly Manual

5. Lift up the keyboard and disconnect it from the system as shown in Fig. 17

Removing the LCD Module

To remove the LCD Module first remove the battery (see
WLAN Card Module (see
Removing the Keyboard) then perform the following steps:
1. Release LCD cable from base unit.
Fig. 17 Disconnecting the keyboard flat cable
Removing WLAN Card
Fig. 18 Releasing LCD cable
NEC Versa S940/PB EasyNote A7 Disassembly Manual
Removing the Battery), remove
Module)and remove the Keyboard (see
Page 15