Table of Contents
Advertisement
Cleaning and care
Burners
28
Do not clean any parts of the burners in a dishwasher.
The burners should be dismantled and then cleaned by hand
using a solution of warm water and a little washing-up liquid
applied with a soft sponge.
Parts of the burner that cannot be removed should be wiped
clean with a damp cloth only.
The ignitor and ignition safety device should be very carefully
wiped clean using a well wrung out cloth.
Do not let the ignitor get wet. If it gets wet it will not spark.
After cleaning, dry all surfaces with a clean cloth.
Make sure that the flame slits are clean and completely dry.
The surface of the different parts of the burner will
gradually become more matt with time. This is quite normal
and will not affect the operation of the hob.
Hide quick links:
Advertisement
Table of Contents
