Stainless Steel Surfaces; Pan Supports, Control Knobs - Miele KM 2256 Operating And Installation Manual

Stainless steel surfaces

Pan supports, control knobs

Clean stainless steel surfaces using an E-Cloth (see "Optional
accessories") or with a solution of warm water and a little
washing-up liquid applied with a soft sponge. In the case of
stubborn dried-on soiling, soak first.
Finally, dry with a soft cloth.
Miele ceramic and stainless steel hob cleaning agent can be
used when required (see "Optional accessories"). Apply with
an even pressure following the direction of the "grain".
To help prevent re-soiling we recommend using the
conditioning agent for stainless steel after cleaning (see
"Optional accessories").
Apply sparingly with a soft cloth follow the instructions on the
packaging.
Printed surfaces (flame symbols)
Remove any soiling which comes into contact with the
printed flame symbols straight away. Soiling, particularly
salty food or liquid can cause damage if left on the printed
surfaces for a long time.
Do not use stainless steel cleaning agents on the printed
flame symbols. This would rub off the print.
Do not clean the pan supports in a dishwasher.
Remove the pan supports. Clean the pan supports and the
control knobs with a solution of warm water and a little
washing-up liquid applied with a soft sponge. Stubborn
soiling should be soaked first.
Finally dry all parts with a clean cloth.
Cleaning and care
27