Cleaning The Trivets; Cleaning The Burners - Miele ProLine CS 1013-1 Operating And Installation Instructions

Cleaning the trivets

 Remove the trivets.
 Clean the trivets in a dishwasher or
with a solution of warm water and a
little washing-up liquid applied with a
soft sponge. Soften any stubborn
soiling beforehand.
 Dry the trivets thoroughly with a clean
cloth.

Cleaning the burners

Do not clean any parts of the burners
in a dishwasher.
The surface of the burner cap will
become duller with time. This is
completely normal and does not
indicate material deterioration.
 The burner should be dismantled and
then cleaned by hand using a
solution of warm water and a little
washing-up liquid applied with a soft
sponge.
 Clean any soiling from the flame
openings.

Danger of explosion.
Blocked flame openings can cause a
dangerous build-up of gas in the
base of the hob which could ignite
and cause an explosion. This can
lead to damage to the appliance and
injury.
Ensure the flame openings are kept
clean at all times.
 Parts of the burner that cannot be
removed should be wiped clean with
a damp cloth only.
Cleaning and care
 The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung-out cloth.
The ignitor must not get wet,
otherwise it will not spark.
 Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
The surface of the burner cap will
become duller with time. This is
completely normal and does not
indicate material deterioration.
27