Regulating The Flame; Switching Off - Miele KM 2256 Operating And Installation Manual

Regulating the flame

Switching off

Regulate the flame so that it does not spread out beyond the
sides of the pan. As the outer part of the flame is much hotter
than the centre, the tips of the flames should stay beneath the
pan base. Flame tips which extend beyond the sides of the
pan merely warm up the air in the room and can also damage
pan handles and increase the danger of injury.
The burners can be regulated at any level between the
strongest and weakest flame. Exception: The wok burner
On the wok burner there is a stopper at the 6 o'clock position
to prevent you turning the control to the high or low setting
unintentionally.
^ To move from the high to the low setting, turn the control
anti-clockwise until it stops. Then press it in and continue to
turn it anti-clockwise past the stopper before releasing it.
You can now select the setting you require.
^ To move from the low to the high setting, turn the control
clockwise until it stops. Then press it in and continue to turn
it clockwise past the stopper before releasing it. You can
now select the setting you require.
^ Turn the control clockwise to position "ß".
This stops the flow of gas and the flame goes out.
Do not turn the control past the "ß" position.
Operation
21