Operation Of The Burners; Turning On - Miele KMR 1124 Operating And Installation Instructions

Operation of the burners

Turning on

 To ignite a burner, push the appropri-
ate control knob and turn it counter-
clockwise to the "High" position. The
ignitor "clicks" and ignites the gas.
 If the burner fails to light, turn the
control knob to the "Off" position. Air
the room or wait at least 1 minute be-
fore trying again.
 If the second attempt also fails to
light the burner, turn the control knob
to the "Off" position and refer to the
"Frequently asked questions" section.
Control Knob
Off Gas supply is off:
Burner off
High Strongest flame setting:
Maximum power of upper
and lower flame rings
Simmer Weakest flame setting:
Upper flame ring off
Minimum power of lower
flame ring
24
Turning on during a power outage
In case of a power failure, the flame
can be ignited manually.
 Press in the burner knob and turn it
counterclockwise to "High."
 Light the emerging gas/air mixture
with a match.