Preparing The Niche - Miele KF 1801 Vi Operating And Installation Manual

^ Do not remove the installation aids
from the appliance door/drawer.
These will be required later when the
appliance is installed in the
building-in niche.
^ Check the appliance for damage
during transportation.
Do not install a damaged appliance!
^ Unscrew the bracket that is holding
the appliance to the delivery pallet.
,
Warning!
Please bear in mind that the
appliance is no longer secured to the
pallet!
^ With the help of several people as
required, carefully lift the appliance
from the pallet, starting with the back
of the appliance.
The appliance can be rolled along the
floor using the wheels at the back.

Preparing the niche

,
Keep the door and drawer to the
appliance closed until it is fixed
inside the building-in niche.
If the niche is deeper than the
appliance, screw a solid wooden beam
a to the floor or wall behind the
anti-tipping mechanism b.
The length of the wooden beam a
must be the same as the width of the
building-in niche.
Assembly parts
All the fixings required for installation
are supplied with the appliance. The
plastic bags are marked with letters for
easy identification.
Each fitting stage is indicated by the
letter on the bag needed for that stage.
^ Use the torx screwdriver supplied to
tighten the screws.
Installation
71