Table of Contents
Advertisement
Preparing the installation niche
Risk of damage and injury due to
the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
doors are open.
The building-in niche must be se-
cured to the wall behind it and/or
above it with several screws. Only
this will prevent the refrigeration ap-
pliance from tipping over after being
installed.
In addition, use the provided anti-tip
brackets to secure the building-in
niche.
The parts required for installation are
supplied with the refrigeration appli-
ance. The plastic bags supplied are
marked with letters for easy identifica-
tion.
When performing the individual as-
sembly steps, observe the letters
specified and use the matching plas-
tic bag with the required installation
equipment.
The anti-tip brackets prevent the refrig-
eration appliance from tipping.
The anti-tip brackets are also used to fix
the building-in niche securely to the
surrounding walls.
Use 2 anti-tip brackets for each in-
dividual appliance or 4 anti-tip brack-
ets for each (side-by-side) combina-
tion of 2 appliances.
Position the anti-tip brackets on
the left and right of the building-in
niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 7'-7' 1 3/4" (2134–
2164 mm) from the floor of the niche.
Installation
31
Hide quick links:
Advertisement
Table of Contents
