Securing And Aligning The Furniture Door - Miele KF 1801 Vi Operating And Installation Manual

Installation
Securing and aligning the
furniture door
^ Insert the angle trim as far as it will
go into the spaces in the frame, as
shown.
^ Open the refrigerator door and hang
the furniture front on its frame onto
the threaded bolts, as shown p.
80
^ Press the angle trim on both sides
into the white plastic frame, and
screw them down securely.
^ Screw the nuts q loosely onto the
threaded bolts - but do not tighten
yet.
^ Close the refrigerator door.
^ Align the refrigerator door to the side
by sliding it over the threaded bolts.
^ Align the depth of the refrigerator
door via the gaps in the angle trim.
Then screw the angle trim into
position.
^ Now screw on the top nuts. The door
is now fixed.
Repeat the steps from "Preparing
the furniture fronts" to fit the furniture
front to the freezer drawer.
The positioning of the freezer drawer
front must be aligned to that of the
refrigerator door front.