Settings Mode - Miele KF 1801 Vi Operating And Installation Manual

Switching on and off

Settings mode

In settings mode, you can select certain
appliance functions via the control
panel and adjust the settings. The
settings for the different functions are
described in more detail in the relevant
section of these instructions.
Overview of functions that can be
selected in settings mode:
Function
To select the
temperature unit
No function selected
Switching the sensor
tone on/off
Confirm water filter
change
To enter or leave
settings mode
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^ Touch the access sensor so that it is
highlighted in yellow.
16
^ Touch the sensor for the refrigerator
^ Take note of the position of the X
^ Touch the access sensor until it is
Symbol
displayed
^ Place your finger in the position of the
†
^ At the same time, briefly touch the
;
=
^ Leave your finger on the X sensor for
^
;
^ Now touch the X sensor repeatedly
^ Touch the access sensor again.
^ By touching the X sensor, you can
^ After selecting a new setting, touch
zone so that it is highlighted in
yellow.
sensor (but do not touch it!).
highlighted in white and all of the
other sensors are no longer lit up.
X sensor, and leave it there.
access sensor (without letting go of
the X sensor).
another 4 seconds until c and the Y
sensor also appear in the display.
until b appears in the display.
now select whether the sensor tone is
switched on or off:
= 0: Sensor tone switched off
= 1: Sensor tone switched on
= –: Return to menu.
the access sensor to confirm your
choice.