Miele KF 1801 Vi Operating And Installation Manual page 50

Problem solving guide
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
20 W/12 V/GY 6.35 cap
^ Engage the lamp cover at the back,
then pull it forward and click it into
place at the front.
Side lighting
^ Turn the lamp cover anti-clockwise to
remove it.
50
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
5 W/12 V/G 4 cap
^ Replace the lamp cover, turning it
clockwise as far as it will go.
^ Reconnect the appliance to the
electricity supply and switch it on.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature, it is advisable not to
open the doors while waiting for the
appliance to be serviced.