Water Filter; To Activate The Reminder To Change The Filter - Miele KF 1801 Vi Operating And Installation Manual

The appliance is supplied with a stan-
dard water filter that filters mains water
for making ice cubes.
You can replace this with an active
charcoal filter which improves the taste
and smell of the ice cubes by removing
chlorine and other substances from the
mains water.
To ensure the quality of the ice
cubes remains high, it is essential to
change the water filter regularly.
Please note:
– All ice cubes that are produced in
the 24 hours after you have changed
the water filter should be discarded.
– If you have not used the ice cube
maker for a while, empty the
container and discard all the ice
cubes that are produced in the
24 hours that follow.
– If you have not used the appliance or
the ice cube maker much in the last
few weeks, or if the ice cubes smell
unpleasant, fit a new water filter.
To activate the reminder to
change the filter
When the appliance is used for the first
time, the reminder to change the filter
needs to be activated so that the
counter is set to 0.
^ Open the refrigerator door.
^ Touch the access sensor so that it is
highlighted in yellow.
The various zones in the appliance are
now visible.
^ Touch the sensor for the refrigerator
zone so that it is highlighted in
yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
^ Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^ Place your finger in the position of the
X sensor, and leave it there.
^ At the same time, briefly touch the
access sensor (without moving your
finger from the X sensor).
^ Leave your finger on the X sensor for
another 4 seconds until the
Y sensors also appear in the display.

Water filter

;
and the
51