Table of Contents
Advertisement
Building in the appliance
Do not remove the installation aids
from the appliance door. These will
be required later when the appliance
is installed in the niche.
Risk of tipping over!
Make sure the appliance is no longer
secured to the pallet as soon as you
unscrew the brackets that fix the ap-
pliance to the pallet.
Unscrew the brackets .
With the help of several people as re-
quired, carefully lift the appliance
from the pallet, starting with the back
of the appliance.
32
As soon as you have set the appliance
upright, you can move it using the
rollers on the bottom.
Preparing the installation niche
Keep the appliance door closed
until the appliance is secured inside
the niche!
Risk of tipping over!
The installation niche must be se-
cured to the wall behind it with sev-
eral screws. Only this can ensure that
the appliance will not tip over after
being installed!
Always use the provided anti-tip
brackets to secure the niche.
Due to the sheer size and weight of
the appliance, it needs to be ensured
that it cannot tip forwards once it is
built into the niche.
Using the installation equipment
Parts required for installation of the
appliance are supplied with the appli-
ance. The plastic bags supplied are
marked with letters for easy identifica-
2
tion.
When performing the individual as-
sembly steps, observe the letters
specified and use the matching plas-
tic bag with the required installation
equipment.
Advertisement
Table of Contents
