Brief Operating Instructions; Filling The Water Container; Selecting A Function; Setting The Temperature / Core Temperature - Miele DGC 5070 Operating Instructions Manual

Brief operating instructions

Filling the water container

Selecting a function

Setting the temperature / core temperature

Setting a cooking duration

26
^ Fill the water container with mains tap water up to at least
the "min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^ Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while F20 will appear in
the display (see "Problem solving guide").
^ Switch on the appliance (s).
^ If the function displayed is not the one you want, touch one
of the illuminated sensors next to the arrows in the display
until the function you want appears.
^ Touch the sensor beside the function to select it.
^ If you want to use the recommended temperature then
confirm with "OK". If you want to change the temperature,
enter the new temperature with either - / + or the numerical
keypad. Confirm with "OK".
^ Enter the duration with either + / - or the numerical keypad
and confirm with "OK".
If you are using the numerical keypad to enter the duration,
you must enter both the hour and the minutes if the
duration is more than 59 minutes.
Example: Duration of 80 minutes = 1:20.