Water Hardness; Display; Volume; Safety - Miele DGC 5070 Operating Instructions Manual

Settings

Water hardness

Display

Volume

Safety

Units

44
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level
I
II
III
IV
The contrast and brightness can be adjusted.
The volume of the buzzer tones and also the keypad tone
which sounds each time a sensor is touched can be altered.
The keypad tone can also be switched off.
Once the setting under "System lock" has been changed to
"Permitted", you will be able to activate the system lock to
prevent the steam combi oven being switched on
unintentionally, by children for example.
You can choose for the weight to be shown in kg or lbs, the
temperature in °C or °F and the depth/thickness in cm or
inches.
Hardness range
1-7 °dH
(0.2-1.3 mmol/l)
8-14 °dH
(1.4-2.5 mmol/l)
15-21 °dH
(2.7-3.8 mmol/l)
>21 °dH (above
3.8 mmol/l)
Setting
Soft 1
Medium 2
Hard 3
Very hard 4