Miele H 370 Operating Instructions Manual page 58

Cleaning and Care
The removable back panel and roof
liner are coated with a dark grey cata-
lytic enamel.
During fan operated cooking circulat-
ing air in the oven deposits oil and fat
splashes predominantly on the back
panel of the oven. These splashes are
burnt off when the temperature of the
oven reaches over 200°C during bak-
ing or roasting. The higher the tempera-
ture the more effective the process.
The oven and accessories should be
cleaned after each use. Otherwise fur-
ther baking and roasting will cause the
deposits to bake on even harder and
cleaning may become difficult and in
extreme cases impossible.
58
Allow the oven to cool down before
cleaning. Danger of burning!
Catalytic enamelled panels should
be cleaned using a solution of hot
water with a little washing up liquid
applied with a soft nylon brush.
Do not use abrasive cleaning
agents, hard brushes, scouring
pads or cloths, steel wool, knives or
other abrasive materials and do not
use oven spray on catalytic enamel
as the chemicals used in oven
sprays will damage catalytic ena-
mel rendering it ineffective.
If using oven sprays on Perfect-
Clean oven surfaces the catalytic
back panel and roof panel must first
be removed from the oven.