Miele H 370 Operating Instructions Manual page 26

Altering oven settings
Some of the standard oven settings
(which are set at the factory) have an
alternative which you can select if re-
quired. Each of these settings has an
identification number which is followed
by :0 or :1. Please consult the Chart for
the different options.
Proceed as follows:
Turn the oven function selector to "0".
Open the oven door fully.
Turn the oven function selector to the
"Light H" position.
Press the " p" button.
"01:0" or the most recently altered set-
ting appears in the oven display.
Use the "+/–" button to call up the
identification number of the setting
required, (see chart).
Please note:
Identification number 02 may appear in
the display but has no function.
If the identification number is followed
by the standard setting is active.
If the identification number is followed
by the alternative setting is active.
Press the "l" button to toggle be-
tween the standard and alternative
settings.
Note: Function 08:
Depending on model, the clock can be
put back by one hour or up to 4 hours
by pressing the "l" button several
times. See chart for details.
26
If you wish to alter more than one set-
ting, you can do so now before saving
your changes in memory.
To save your settings in memory turn
the oven function selector to the "0"
position.