Table of Contents
Advertisement
The hob can only be signed on when the communication module is in the correct
position.
If the signing on process is unsuccessful, check first of all that the communication
module is fitted correctly. If necessary, push the module into the slot until it clicks
into position and then repeat the signing on procedure.
Messages in the InfoControl mobile receiver display
Message
Activation failed.
Sign on failed.
Other problems
Problem
The hob does not
appear in the list of
signed on appliances.
Cause
There was a problem during
activation.
The signing on procedure was
not started on the hob.
There was a problem during
activation.
Cause
The signing on procedure
has not been carried out on
the hob.
There was a problem with
installing the SuperVision /
InfoControl master
appliance at a later date.
The hob is not suitable for
displaying on the
SuperVision appliance or
the InfoControl unit.
Problem solving guide
Remedy
^ Repeat the First installation
of the InfoControl unit.
^ Repeat the signing on
procedure on the
InfoControl unit and on the
hob, see "Signing on the
hob to the InfoControl unit at
a later date".
^ Repeat the signing on
procedure.
Remedy
^ Repeat the signing on
procedure on the master
appliance and on the
hob.
^ Select the "Search for
appliances" function on
the master appliance.
^ Refer to the chart in
"Miele|home".
29
Hide quick links:
Advertisement
Table of Contents
