Table of Contents
Advertisement
Setting the temperature
The temperature can be set in all three
zones separately.
To do this, press the buttons under the
respective temperature displays:
Press the
+ button : to raise the temperature
– button: to reduce the temperature.
The temperature being set will flash in
the display.
When pressing the buttons, the
following information shows in the
display:
– When first pressed, the last
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button, the current temperature of
the zone concerned is automatically
shown.
The optimum temperature and humidity
Temperature range
In all three zones, it is possible to set
temperatures between 5 and 20°C.
Temperature displays
During normal operation, the
temperature displays on the control
panel show the temperatures inside
each zone.
If the temperature in one of the zones is
not within the range that the appliance
is able to display, only bars will light up
in the temperature display.
Depending on the ambient temperature
and the setting, it can take the
appliance a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature in the display.
The temperature display will flash if
– a different temperature is being set,
– the temperature in one of the zones
is too high or too low.
15
Hide quick links:
Advertisement
Table of Contents
