Related Manuals for Miele KWT 2662 ViS
Summary of Contents for Miele KWT 2662 ViS
- Page 1 Operating and Installation Instructions Wine Conditioning Unit To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr. 11 508 730...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS ............Caring for the environment ................14 Installation......................15 Installation location ..................... 15 Climate class ....................16 Installation notes ....................17 Adjoining cabinetry..................17 Load-bearing capacity of the niche floor ............17 Ventilation ....................... 18 Door hinge...................... 18 Side-by-side .................... - Page 3 Optional accessories................... 59 Before first use ....................60 Choosing the right Door Assistant (Push2Open/Pull2Open) ......60 Miele@home ....................60 Operating the wine conditioning unit ..............62 Starting up for the first time ................63 Switching the wine conditioning unit on and off ..........64 Switching off for longer periods of time ..............
- Page 4 Contents Cleaning and care ..................... 89 Cleaning agents....................89 Before cleaning the wine conditioning unit ............90 Interior, accessories, and appliance door ............90 Cleaning the door seal ..................91 Cleaning the ventilation gaps ................91 After cleaning ...................... 91 Frequently Asked Questions ................
-
Page 5: Important Safety Instructions
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these instructions in a safe place and pass them on to any future owner. - Page 6 The wine conditioning unit is not suitable for use in areas where there is a risk of explosion. Miele cannot be held liable for damage resulting from improper or in- correct use of the appliance. ...
- Page 7 IMPORTANT SAFETY INSTRUCTIONS Safety with children Children near the wine conditioning unit must be supervised. Do not let children play with the wine conditioning unit. The wine conditioning unit door hinges can cause injury. Keep children away at all times. ...
- Page 8 - Disconnect the wine conditioning unit from the electricity supply. - Ventilate the room where the wine conditioning unit is located for several minutes. - Contact Miele Service. The more coolant there is in a wine conditioning unit, the larger the room it should be installed in.
- Page 9 If the power cord supplied is damaged, it must only be replaced by an original part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when original Miele parts are used.
- Page 10 Repairs and other work performed by unauthorized persons could be dangerous and may void the warranty. Faulty components must only be replaced by genuine Miele re- placement parts. Miele can only guarantee the safety standards of the appliance when Miele replacement parts are used.
- Page 11 Risk of explosion. Do not operate any electrical appliances inside the wine conditioning unit. Risk of sparking and explosion. Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty may become invalid.
- Page 12 IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Do not use a steam cleaning appliance to clean this wine condi- tioning unit.
- Page 13 IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance Children could become trapped in the machine and could suffo- cate. - Remove the machine doors. - Leave the wooden shelves in the machine so children cannot climb inside. DANGER of electric shock! - Cut the plug off the power cord.
-
Page 14: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 15: Installation
*INSTALLATION* Installation If installation near a heat source is un- Installation location avoidable, observe the following mini- This appliance should be installed in a mum distances between the appliance dry, well-ventilated room. and the heat source: When deciding where to install your - At least 1 1/4"... -
Page 16: Climate Class
*INSTALLATION* Installation Climate class Impaired functionality due to This wine storage unit is designed for high humidity and high temperature. use in climate class SN-T (room tem- High humidity (over approx. 70%) perature range). Do not use in a climate combined with a high room tempera- class for which it is not designed. -
Page 17: Installation Notes
*INSTALLATION* Installation Load-bearing capacity of the niche Installation notes floor Risk of damage and injury from To ensure the safe installation of the the wine conditioning unit tipping wine conditioning unit and to guarantee over. its correct functioning, the floor of the The wine conditioning unit is very niche where the appliance is to be in- heavy and can tip forwards when the... -
Page 18: Ventilation
The wine conditioning unit is sup- plied with a fixed hinge. On no ac- count should you attempt to change the door hinge yourself. If you need to change the door hinge to the other side, please contact the Miele Service department. - Page 19 *INSTALLATION* Installation If the partition wall a is narrower than 6 5/16" (160 mm), you will need the side panel heater from the side-by-side installation kit to prevent condensation from forming and any resulting damage. When planning installation niches, please note that the niche into which the appliance with the side panel heater is installed must be 3/16"...
-
Page 20: Installation Dimensions
*INSTALLATION* Installation Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency. - Page 21 *INSTALLATION* Installation KWT 26x2 Vi(S) 84"-85 3/16" 24" (610 mm) 24" (610 mm) + door (2134–2164 mm) front 3/4"-1 1/2" (19–38 mm)
- Page 22 *INSTALLATION* Installation 1 3/16" (30 mm) 7/8" 10 5/16" (22 mm) (262 mm) 3 3/8" 4" 4" (85 mm) (102 mm) (102 mm) Side view...
-
Page 23: Dimensions When The Appliance Door Is Open (Opening Angle 90°/115°)
*INSTALLATION* Installation Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) D (with a door front of 3/4" (19 mm)) 26 5/8" (677 mm) Door front Door handle 11 5/8" (296 mm) (3/4"-1 1/2" (19–38 mm)) * The dimensions of the door front and the door handle vary depending on the de- sign of the kitchen. -
Page 24: Dimensions Of The Cabinet Front
*INSTALLATION* Installation Dimensions of the cabinet front 23 3/4" (604 mm) 3" (77 mm) 17 3/4" (450 mm) 5 7/8" (149,5 mm) 63 7/8" (1622 mm) 79 7/8" (2029 mm) 10 1/8" (257,5 mm) ≥ 4" – 5 3/16" (≥ 102 – 132 mm) -
Page 25: Installing The Wine Conditioning Unit
*INSTALLATION* Installation - in Canada: the Canadian Electrical Installing the wine conditioning Code C22.1 – latest edition/Provincial unit and Municipal codes and/or local codes. Before starting... It is essential to read these installa- tion instructions carefully before starting to install the wine condition- ing unit. -
Page 26: Tools Required
*INSTALLATION* Installation Tools required Weight of door front - Cordless drill Before installing the door front, ensure that the weight of the door does not ex- - TX 20 screwdriver ceed the maximum permitted: - Hammer drill Wine conditioning Max. weight of - Drill bits in various sizes, depending unit door front... -
Page 27: Aligning The Installation Niche
*INSTALLATION* Installation Aligning the installation niche Checking the installation niche Check the installation dimensions (see “Installation – Installation dimen- sions”). Check the position of the electrical connection. The length of the power cord is 9' 10" (3 m). The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency. -
Page 28: Before Installation
*INSTALLATION* Installation To protect the floor during installation, Before installation secure an off-cut of flooring or similar Before installation, remove any ac- material to the floor in front of the in- cessories from the outside of the ap- stallation area. -
Page 29: Preparing The Installation Niche
*INSTALLATION* Installation Preparing the installation niche Risk of damage and injury from the wine conditioning unit tipping over. The wine conditioning unit is very heavy and can tip forwards when the appliance door is open. The installation niche must be se- cured to the wall behind it and/or above it with several screws. - Page 30 *INSTALLATION* Installation The anti-tip brackets prevent the wine Danger of injury and damage to conditioning unit from tipping. the appliance due to the wine condi- tioning unit tipping over. The anti-tip brackets are also used to fix the installation niche securely to the If the anti-tip brackets are fixed too surrounding walls.
- Page 31 *INSTALLATION* Installation Retaining screws for different uses and types of material are supplied in the accompanying pack. Securing with a wooden wedge Secure the installation niche to the wall behind it and/or above it as re- quired using the anti-tip brackets . Securing to a concrete wall Securing to a wooden wall...
-
Page 32: Pushing The Wine Conditioning Unit Into The Niche
*INSTALLATION* Installation Pushing the wine conditioning unit into the niche Then push the wine conditioning unit into the niche, taking care not to damage the electrical cord. If you are installing several appliances side by side, secure the wine condi- tioning units/refrigeration appliances to one another now (see the installa- tion instructions for the side-by-side... -
Page 33: Aligning The Wine Conditioning Unit
*INSTALLATION* Installation Tip: Secure the power cord to prevent it Aligning the wine conditioning unit becoming caught: tie a piece of string The installation aids on the appli- to the middle of the power cord and as ance door provide assistance with the the wine conditioning unit is being alignment of the wine conditioning unit pushed into the niche, pull the cord for-... - Page 34 *INSTALLATION* Installation Cabinet-front thickness of 1 1/2" (38 mm) The adjustable feet at the front and back of the appliance can all be ad- Position the supplied spacers on justed from the front of the appliance. both sides on the markings next to the adjustable feet at the front of the ...
- Page 35 *INSTALLATION* Installation Adjust the rear feet with a ratchet (at- Adjust the front feet with a ratchet (at- tachment: socket, 8 mm) or a TX 20 tachment: socket, 8 mm) or a TX 20 screwdriver . screwdriver .
- Page 36 *INSTALLATION* Installation Tip: Proceed carefully when adjusting Risk of damage if the feet are the feet, alternating between the left adjusted too much. and right feet. The rear adjustable feet can be dam- aged. Unscrew the feet only until the marking on the toe-kick is aligned to a maximum of 2 7/16"...
-
Page 37: Securing The Wine Conditioning Unit In The Niche
*INSTALLATION* Installation Securing the wine conditioning unit If it is not possible to secure the wine in the niche conditioning unit at the top, it can be at- tached to the installation niche with the side retaining lugs: Flip open the side retaining lugs . ... -
Page 38: Preparing The Cabinet Fronts
*INSTALLATION* Installation Open the appliance door. Preparing the cabinet fronts Open the appliance door as far as it will go. Screw the retaining plate lugs at the top and bottom to the cabinetry adjacent to the appliance. In a side-by-side combination, only the external panels of the wine condi- tioning units/refrigeration appliances... - Page 39 *INSTALLATION* Installation Unscrew the angle trims from both Measure the gap X between the sides of the appliance door and place mounting frame and the upper edge the trims and screws to one side – of the adjacent cabinet front. they will be required later.
- Page 40 *INSTALLATION* Installation Secure the mounting frame to the top of the cabinet front, using at least 6 screws. The mounting frame has several differ- ent types of holes to take account of a variety of cabinet fronts. When securing the frame, always screw into the strongest part of the cabinet front.
-
Page 41: Securing And Aligning The Cabinet Front
*INSTALLATION* Installation Securing and aligning the cabinet front Now insert the angle trims on both sides as far as they will go into the provided spaces in the mounting frame . Open the appliance door and hang the cabinet front on its frame ... - Page 42 *INSTALLATION* Installation Align the depth of the cabinet front via the gaps in the angle trims . Press the angle trims into the white plastic frame on both sides and screw them on loosely at first. Spare screws are provided in the plastic bag marked with the letter E.
- Page 43 *INSTALLATION* Installation Mounting the fixing brackets The fixing bracket is used to secure the cabinet front to the bottom of the appli- ance door. Do not mount the fixing brackets until the wine conditioning unit (or side-by- side combination, if applicable) has been installed and the cabinet fronts ...
- Page 44 *INSTALLATION* Installation Tighten the screw at the bottom of the appliance door. Screw the fixing bracket securely to the cabinet front. Install the cover over the fixing bracket .
-
Page 45: Securing The Covers
*INSTALLATION* Installation Securing the covers Before the cover can be installed in the gap above the wine condition- ing unit, it must be assembled as fol- lows: Click the covers onto the fixing brackets. Insert the two parts of the cover into one another. - Page 46 *INSTALLATION* Installation Install the two plastic covers on both sides of the appliance door by Place the assembled cover into clicking them into the gap between the gap above the wine conditioning the appliance door and the cabinet unit so it clicks into place.
- Page 47 *INSTALLATION* Installation Install the cover onto the light con- tact switch. Secure both sides of the wine condi- tioning unit using at least 3 clips for the covers. Now attach the covers onto the re- taining clips ...
-
Page 48: Fitting The Door Trim
*INSTALLATION* Installation Fitting the door trim Cut the short pieces of door trim for the top and bottom of the door to the Cut the door trim to the width of the length required Y. cut-out in the cabinet front as re- quired. -
Page 49: Securing The Toe-Kick Ventilation Grille And Toe-Kick Panel
*INSTALLATION* Installation Securing the toe-kick ventilation Limiting the opening angle of the ap- grille and toe-kick panel pliance door The door hinges on the wine condition- ing unit are set at the factory to enable the appliance door to be opened wide. If, for example, the appliance door hits an adjacent wall when it is opened, you should limit the opening angle of the... -
Page 50: Electrical Connection
*INSTALLATION* Installation Wait for 1 hour after installation before Electrical connection plugging the wine conditioning unit into Risk of electric shock! the power supply. This allows coolant and refrigerator oil to settle in accor- The wine conditioning unit must only dance with regulations. - Page 51 *INSTALLATION* Installation If the outlet is no longer accessible after Connecting the wine storage unit installation, an additional means of dis- connection must be provided for all poles. Suitable means of disconnection include switches with an all-pole con- tact gap of at least 1/8" (3 mm). These can be circuit breakers, fuses, and re- lays.
-
Page 52: Saving Energy
Saving energy Normal Increased energy consumption energy consumption Installation / In a well-ventilated room. In an enclosed, poorly venti- Maintenance lated room. Protected from direct sun- In direct sunlight. light. Away from heat sources (ra- Near a heat source (radiator, diator, range/oven). - Page 53 Saving energy Normal Increased energy consumption energy consumption Wooden shelves arranged as they were when the appli- ance was delivered. Only open the door when Frequent opening of the necessary and for as short a door for long periods will time as possible.
-
Page 54: Guide To The Appliance
Guide to the appliance a Display b On/Off switch c Wooden shelves with labels d Interior lighting e Isolator plate for thermal separation of the wine conditioning zones f SommelierSet* g Glass door with UV filter h Automatic door opening (Push2open/Pull2open) - Page 55 Guide to the appliance * The SommelierSet consists of: A glass holder, a bottle holder, 2 accessory boxes, and a decanter plate. The SommelierSet also includes felt inserts in various sizes.
-
Page 56: Start Screen
For switching the interior lighting on and off when the appliance door is closed (ambient lighting) d Display for Miele@home connection status (only visible when the Miele@home function has been set up) e Settings mode sensor control for adjusting various settings in Settings mode... -
Page 57: Settings Mode
Door Assistant Switch on ( Push2Open Pull2Open ) or switch off (see “Selecting additional settings”) Miele@home Set up, deactivate, or query WiFi connection sta- tus (see “Selecting additional settings”) * Demo Mode Switch off * (only visible when Demo Mode , is switched on see “Selecting additional settings”) - Page 58 Guide to the appliance Reset to default settings Factory Default (see “Selecting additional settings”) Ambient Lighting Choose between 5 different settings for ambient lighting (see “Selecting additional settings”) Ambient Display Set the appearance of the display when the door is closed (see “Selecting additional settings”) ...
-
Page 59: Accessories
Accessories Accessories supplied Optional accessories A range of useful Miele accessories and Appliance plug care products are available for your wine conditioning unit. Chalk Use the chalk supplied to write on the Stainless steel front panel magnetic strips on the wooden shelves... -
Page 60: Before First Use
To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app will guide you as you connect your wine storage unit to your... - Page 61 There- fore, the availability of featured func- tions cannot be guaranteed. Miele@home availability The ability to use the Miele app de- pends on the availability of the Miele@home service in your country. The Miele@home service is not avail- able in every country.
-
Page 62: Operating The Wine Conditioning Unit
Before first use Settings mode Operating the wine condition- ing unit In Settings mode , you can select different wine conditioning unit func- The touch display can be scratched tions and alter their settings to some by pointed or sharp objects, e.g., extent (see “Selecting additional set- pens. -
Page 63: Starting Up For The First Time
- Set the Temperature Unit °C (degrees Celsius) or °F (degrees Fahrenheit) Set up Miele@home Select if you would like to set Continue Miele@home now. You will then be guided by the display and the Miele app. -
Page 64: Switching The Wine Conditioning Unit On And Off
On/Off switch. Miele will appear, followed by the main screen on the wine storage unit display: ... -
Page 65: Switching Off For Longer Periods Of Time
Switching the wine conditioning unit on and off Switching off for longer peri- ods of time If the wine storage unit is not going to be used for a longer period of time: Switch the wine storage unit off. ... -
Page 66: Selecting Additional Settings
Selecting additional settings In Settings mode , you can select dif- The display is unlocked briefly so you ferent wine conditioning unit functions can adjust the settings as required. and alter their settings to some extent, Closing the door of the wine condition- allowing you to adjust the appliance to ing unit will reactivate the keypad lock. -
Page 67: Performing A Self Test
sensor control. Make a note of the error message(s) displayed. Contact Miele Service and inform them of the error message(s) on the display. Confirm the message with OK. -
Page 68: Switching On The Door Assistant
Selecting additional settings Switching on Push2Open Switching on the Door Assis- tant In Settings mode , use the and sensor controls to select Door As- You can choose between the two Door sistant and select OK to confirm your Assistants Push2Open Pull2Open selection. - Page 69 Selecting additional settings – Adjusting the duration of the Auto- – Adjusting the intensity Close function You can also adjust the intensity of the You can also adjust the duration for function. The lower the set in- Pull2Open how long the appliance door will remain tensity, the less force required when open until it closes automatically.
-
Page 70: Switching Off The Door Assistant
Selecting additional settings Switching off the Door Assis- Miele@home tant Setting up Miele@home In Settings mode , use the and The message only Set up Miele@home sensor controls to select Door As- appears if your wine storage unit has and select OK to confirm your... - Page 71 Activating Miele@home Setting up Miele@home again If you have changed your WiFi network, If you have already activated you can set up Miele@home again for Miele@home and then disconnected your wine conditioning unit. the connection, you will need to reac- tivate the connection.
-
Page 72: Switching Off Demo Mode
Selecting additional settings Switching off Demo Mode Demo mode allows the wine condi- tioning unit to be presented in the showroom without the cooling sys- tem being switched on. Do not acti- vate this setting for domestic use. If Demo mode has been switched on as a default setting, ... -
Page 73: Resetting The Settings To Their Default Settings
Selecting additional settings Resetting the settings to their default settings You can reset the wine conditioning unit‘s settings to their default settings. Reset the wine conditioning unit’s settings to the default settings when disposing of your wine conditioning unit, selling it, or putting a used wine conditioning unit into operation. - Page 74 (4 of 7 segments) °F ° C Temperature Unit °Fahrenheit / Keypad Lock Switched off Door Assistant Push2open Miele@home Switched off Ambient Lighting Ambient 2 Ambient Display Temperature display Sabbath Mode Switched off Humidity Not increased ...
-
Page 75: Switching Sabbath Mode On Or Off
Selecting additional settings Switching Sabbath Mode on You can still select: or off - the sensor control for Settings mode so that Sabbath Mode can be The wine conditioning unit offers a Sab- switched off bath Mode for the purposes of religious observance. -
Page 76: Switching Ambient Lighting On Or Off
Selecting additional settings Selecting the intensity of the Ambient Switching Ambient Lighting Lighting on or off You can set the intensity of the Ambient Ambient Lighting can be switched on Lighting in Settings mode . so your wines are on display even when the appliance door is closed. -
Page 77: Selecting The Ambient Display
Use the and sensor controls to select the required display settings: - Temperature Miele logo - Off (display switched off completely). Confirm your selection with OK. The display settings you have selected are now active when the appliance door is closed. -
Page 78: The Ideal Temperature And Humidity
The ideal temperature and humidity Wine continues to mature depending on Type of wine Recommended the surrounding conditions. The length drinking temper- of time for which wine can be kept in ature good condition will therefore depend Light, fruity red 57°... -
Page 79: Isolator Panels For Thermal Separation
The ideal temperature and humidity Isolator panels for thermal separation Setting the temperature Touch the sensor control to set the The wine conditioning unit has two fixed isolator panels that divide the inte- temperature. rior into three zones, which can be con- The previously set temperatures for the ditioned in different ways. -
Page 80: Humidity
The ideal temperature and humidity The temperature display always shows Risk of damage caused by ex- the required temperature. cess moisture This will lead to condensation on the If you have adjusted the temperature, interior walls, which can cause corro- wait for approx. - Page 81 The ideal temperature and humidity Not increasing the humidity Touch the sensor control to set the temperature. Use the and sensor controls to select the wine conditioning zone for which you do not want to increase the humidity and select OK to confirm your selection.
-
Page 82: Door Alarm
Door alarm Door alarm An alarm will sound if the appliance door has been left open for longer than approx. 2 minutes. Close the door message also ap- pears on the display. As soon as the door is closed, the alarm will stop and the message on the display will disappear. -
Page 83: Storing Wine Bottles
Storing wine bottles Always observe USDA food safety Risk of injury from falling wine guidelines. bottles. Wine bottles may become wedged in the wooden shelves above and fall WARNING! Fire hazard! out of the wine conditioning unit Do not operate any electrical equip- when the shelves are pulled out. -
Page 84: Wooden Shelves
Storing wine bottles Adjusting the wooden shelves Wooden shelves The slats in the wooden shelves can be individually adjusted to suit, so that ev- ery bottle is stored in perfect safety re- gardless of shape or size. The wooden shelves are mounted on telescopic runners which can be pulled out to make it easier to store and re- ... -
Page 85: Labeling The Wooden Shelves
Storing wine bottles Labeling the wooden shelves Maximum capacity For quick and easy identification of the Risk of damage due to heavy wines stored, you can write on the loads. blackboard-painted surface of the strips Excessive loads can damage the on the wooden shelves. -
Page 86: Sommelierset
SommelierSet Setting up the SommelierSet The SommelierSet can be used to have your wine ready for drinking, straight from the wine conditioning unit. You can store wine glasses and accessories, de- cant your wine, and store open bottles in the wine conditioning unit. For ideal access, the SommelierSet sits on the wooden shelf at the bottom of the wine conditioning zone in the center... - Page 87 SommelierSet Insert the two racks into the glass holder . Pull the runners above the bottom shelf out as far as they will go on both sides. Slide the retainers into the bottle holder . Tip: The retainers can be adjusted indi- ...
-
Page 88: Automatic Defrosting
Automatic defrosting WARNING! DANGER of injury and damage! Do not use any mechanical or other types of aids which are not recom- mended by the manufacturer to ac- celerate the defrosting process. The wine conditioning unit defrosts au- tomatically. -
Page 89: Cleaning And Care
Cleaning and care Cleaning agents WARNING! DANGER of electric shock! To avoid damaging the surfaces of your Unplug the appliance or trip the cir- appliance, do not use: cuit breaker. - cleaning agents containing soda, am- monia, acids, or chloride ... -
Page 90: Before Cleaning The Wine Conditioning Unit
Cleaning and care Before cleaning the wine con- Interior, accessories, and ap- ditioning unit pliance door Switch the wine conditioning unit off Clean the wine conditioning unit reg- by pressing the On/Off switch. ularly, or at least once a month. Clean up any spills, stains, or food ... -
Page 91: Cleaning The Door Seal
Do not use oil or grease on the door brush or vacuum cleaner (you could seal. use a Miele Vacuum Cleaner dust brush, for example). The door seals should be cleaned regularly with clean water, and then After cleaning wiped dry with a soft cloth. -
Page 92: Frequently Asked Questions
“Performing a ”). Self Test Test . Your appliance will Contact Miele Service and inform them of the error be checked for any message(s) on the display. faults or malfunctions. The wine conditioning The wine conditioning unit is not switched on. - Page 93 Frequently Asked Questions Problem Possible cause and solution Only open the appliance door when necessary and for as short a time as possible. After a while, the temperature will return to normal by itself. The appliance door is not properly closed. ...
- Page 94 Frequently Asked Questions Problem Possible cause and solution No alarm sounds de- You have switched off the audible signal. spite the appliance door Switch the audible signal back on using Settings being open. mode . Sabbath Mode function is switched on: the tem- perature display is dark and the symbol is shown on the display.
- Page 95 The voltage level is too high/low. Observe the connection data under “Electrical connections”. Contact Miele Service if necessary. To turn the alarm off, touch the symbol. The error message does not disappear from the dis- play until the error has been rectified.
- Page 96 Do not remove the lighting cover. The LED lighting may only be repaired or replaced by Miele Service. Risk of injury from LED lighting. This lighting corresponds to risk group RG 2. If the cover is defective, there is a risk of eye injury.
- Page 97 Frequently Asked Questions General problems with the wine conditioning unit Problem Possible cause and solution Bacteria has begun to Bacteria may form on the labels, depending on the form on the wine bottle type of label adhesive used. labels. Clean the wine bottles and remove any adhesive residue.
-
Page 98: Causes Of Noises
Causes of noises Normal Cause noises Brrrrr ... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub ... A gurgling noise can be heard when the refrigerant circulates through the pipes. -
Page 99: Customer Service
In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call on- line at www.miele.com/service. Contact information for Miele Cus- tomer Service can be found at the end of this document. -
Page 100: Declaration Of Conformity
Declaration of conformity Frequency range 2.412 GHz – 2.462 GHz Maximum trans- < 100 mW mitting power... -
Page 101: Copyrights And Licenses
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. - Page 103 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Vaughan, ON L4K 4V8 Customer Service & Support www.miele.ca Phone: 888-99-MIELE(64353) Customer Care Centre info@mieleusa.com...
- Page 104 KWT 2662 ViS, KWT 2672 ViS en-US, CA M.-Nr. 11 508 730 / 02...