Setting The Temperature - Miele KWT 6322 UG Operating And Installation Instructions

The optimum temperature and air quality
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the ex-
ternal temperature should fall, a heater
element switches on automatically to
keep the temperature inside as constant
as possible. If the ambient temperature
continues to fall, the appliance switches
itself off automatically.
Isolator plate for thermal separation
The unit comes with a fixed isolation
panel that partitions the interior of the
wine conditioning unit into two separate
temperature zones. This enables you to
store different types of wine at the same
time, e.g., red wine and Champagne.
The isolation strips inside the glass
door prevent the exchange of heat
between the individual zones.
26

Setting the temperature

The temperature in the wine condition-
ing zones can be set independently of
one another.
 Touch the sensor for the zone for
which you wish to change the tem-
perature, so that it is highlighted in
yellow.
The current temperature for the selec-
ted zone appears in the display.
 Use the two sensors underneath the
display to set the temperature.
By touching the sensor
– the temperature will get colder
– the temperature will get warmer.