Miele KWT 4974 SG ed Operating And Installation Instruction page 34

Wine conditioning unit
Table of Contents

Advertisement

Changing the door hinging
^ Remove cover o from the top of the
appliance door.
^ Place the door on upper hinge pin k.
^ Swing the door slowly inwards so that
lower hinge pin g fits into the guide
on hinge bracket b.
^ Close the door and align it both
vertically and horizontally.
^ Insert screw a into the outer hole of
hinge bracket b and tighten to
secure the hinge pin in the hinge
bracket.
^ Carefully lever recessed handle
fascia p away from the door by
inserting a flathead screwdriver into
groove q as shown.
Be careful not to let the screwdriver
slip and cause damage to the
appliance.
^ Carefully remove handle fascia p
towards the right hand side.
34
^ Now insert handle fascia p into the
handle strip on the opposite side of
the door. Work it in methodically until
it is sitting flush at the sides.
^ Place cover caps f and o into the
now open handle strip from the
inside so that the plugs are not
visible from the outside.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents