Miele KWT 4974 SG ed Operating And Installation Instruction page 35

Changing over the door lock:
^ Open the appliance door.
^ Remove the key from the door lock.
^ Remove cover a by inserting a
flathead screwdriver into the notch in
the cover (see arrow).
^ Remove both screws b from the lock
mounting.
^ Remove lock c together with the
lock mounting. To do this you can
insert the key in the lock and then
use the key to pull out the lock.
^ Place the lock in front of you as
shown and use a flathead
screwdriver to lever safety disc d
upwards and out.
^ Remove lock lever e from the lock.
Changing the door hinging
^ Hold the lock mounting in your hand
as shown.
^ Press the lock down and turn it 90°
as far as it will go.
^ Replace lock lever e turned through
180 ° (as shown).
^ Slide in safety disc d as shown, until
it clicks into position.
^ Remove the cover from the opposite
side of the door and refit it in the
position the lock was previously.
^ Insert the lock into its new position on
the other side of the door.
^ Secure the door lock with the screw
and refit cover a.
35