Miele KM 470 Operating Instructions Manual page 29

... one of the following faults has oc-
cured:
– The Booster function has been auto-
matically switched off early .
– The set power setting of 9 flashes al-
ternately in the display with the 8.
– A 0 flashes in the display for all
zones.
One of the two overheating protection
mechanisms has been activated. (See
"Overheating protection").
... the food in the pan hardly heats
up or does not heat up at all when
the Auto heat-up function is
switched on ?
This could be because:
– the pan does not transfer the heat
properly.
– there is too large a quantity of food
in the pan.
Select a higher continued cooking set-
ting next time or start cooking at the
highest setting and then turn down to a
lower setting manually later on.
Problem solving guide
... The cooling fan continues to run
after the appliance has been
switched off
This is not a fault. The fan will continue
running until the appliance has cooled
down. It will then switch itself off auto-
matically.
29