Miele KM 470 Operating Instructions Manual page 27

The ceramic surface should be
cleaned regularly, preferably after each
use.
Before cleaning allow the hob to cool
down. Wipe soiling off using a damp
cloth. Stubborn soiling is best removed
with a shielded scraper blade.
Then apply a proprietary cleaning
agent for ceramic surfaces using a soft
cloth or kitchen paper towel. This way
any limescale deposits, caused for
example by water boiling over and me-
tallic marks (aluminium deposits) are
removed.
If wished you could use a cleaning
agent with a protective additive de-
signed to prevent water marks and
smears adhering to the surface.
Finally wipe the hob surface with a
damp cloth and then dry it with a clean
soft cloth.
Cleaning and care
Should any sugar, plastic or alumi-
nium foil spill or fall on to the hob while
it is in use, first switch off the hob. Then
immediately, while the surface is still
hot, use a shielded scraper blade to
scrape off the sugar, plastic or alumi-
nium foil, taking care not to burn your-
self. Allow the hob to cool down and
then clean with a suitable proprietary
ceramic hob cleaner.
27