System Hardware; Scsi Controller; Bios Setting For Default Video Controller - Intergraph Zx10 Manual
Late-breaking news
Hide thumbs
Also See for Zx10:
- System manual (118 pages) ,
- System board manual (52 pages) ,
- System manual (100 pages)
Table of Contents
Advertisement
System Hardware
SCSI Controller
On a system with an Ultra3 SCSI controller (LSI 53C1010), Ultra2 and Ultra3 devices connected
to the controller operate at their respective transfer rates.
BIOS Setting for Default Video Controller
If your system has dual monitors, you can select which video controller is the boot display device
(used for VGA display).
To set the default video controller in the BIOS:
1.
Restart the system and run the BIOS Setup program.
2.
In the Advanced menu, go to PCI Configuration » AGP Device » Default Primary Video
Adapter and press
3.
Select the device you want to use and press
4.
Save the change and exit from BIOS Setup.
See the System Board Manual for more information on running BIOS Setup.
.
ENTER
.
ENTER
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Zx10 and is the answer not in the manual?