Setup And The Scsi Controller Driver; Boot Hang; Mylex Raid Controller - Intergraph Zx1 Manual

When going through Setup for the first time on a system running Windows NT Server, do the
following when asked if you want Setup to search for the network adapter:
1. Click Select from List and then click Have Disk.
2. In the text box, replace A: with \winnt\pro100plus, and then click OK. On a system with
Japanese Windows NT Server, replace A: with C: and then click OK.
3. When prompted to select the OEM option, click Intel PRO Adapter and then click OK.
When going through Setup at all other times, complete Setup without auto-detecting the system's
network controller. When Setup completes, install the network controller driver software manually
from diskette.
The network controller driver software is in the
First see the
README
program. Then see the
in the Windows NT Control Panel.
After installing the network controller driver software, see the System Guide for information on
configuring networking. When installing network protocols (such as TCP/IP), you can install them
from :\ \ 386 on your system.
C WINNT I

Setup and the SCSI Controller Driver

If you reinstall Windows NT, you must install the SCSI controller driver software from diskette.
You cannot install it from the system's driver CD.
System Hardware

Boot Hang

Your system may hang intermittently while booting, following the display of the "Z" logo with a
blinking cursor, or after scanning devices connected to the SCSI controller. If this happens, restart
the system and run BIOS Setup. Go to Advanced CMOS Setup and set Quick Boot to disable,
then save the change and exit from BIOS Setup. This procedure marks unused IDE ports as "not
installed," so you must repeat it if you add any IDE devices later.

Mylex RAID Controller

If your system has a Mylex RAID controller, you can press
configuration utilities. To ensure your system can do this, restart the system and run BIOS Setup.
In Advanced CMOS Setup, set 2nd Boot Device to SCSI, then save the change and exit from
BIOS Setup. For more information on Mylex RAID configuration, see the Mylex documentation
delivered with the RAID controller.
PRO
. file for information on creating a driver diskette using the
TXT
. file for information on installing the driver software using Network
MS TXT
100 folder on the system's driver CD.
PLUS
+ during system boot to run RAID
ALT R
3
.
MAKEMS BAT