Telematrix Spectrum Plus SP550 User Manual page 21

Set up using keypad
dialing with automatic
speaker activation or
using key pad dialing
and pressing dial key to
activate.
Display indicates condition of ON or OFF, then next screen appears.
12/01
LIVE DIALPAD ON
12/01
PRESS 1=ON 2=OFF
Note: Programming can
only be performed when
!
the phone is on-hook
LIVE DIALPAD XXX
PRESS 1=ON 2= OFF
12:00
PM
12:00
PM
!
LIVE DIALPAD Feature
(Administrator)
This feature sets up the telephone dialing
pad method.
When LIVE DIALPAD is OFF, and the
handset is ON HOOK, the user enters a
number on the keypad and then must
press the "DIAL" key to activate dial
tone.
When LIVE DIALPAD is ON, and the
handset is ON HOOK, the dial tone acti-
vates immediately upon pressing the key-
pad.
The handset can be lifted at any time to
activate the receiver.
To enable or disable LIVE DIALPAD ON.
1. Press and hold the "STORE" key for
6-seconds.
2. Press "STORE" multiple times until
the LCD displays "LIVE DIALPAD ON".
3. Press "1=ON" to enable, or "2=OFF"
to disable.
4. To exit the program mode, press
"DISC" or continue to the end of pro-
gramming by pressing the "STORE"
key multiple times until the display
reads "All Setup OK".
NOTE: The Live Dial Pad feature works only
when the handset is ON HOOK, it does not
work when the handset is OFF HOOK.
21