Remote Control - Zibro S1523 Operating Manual

Remote Control

1
2
3
4
5
6
7
8
The above example of indications is for
the purpose of explanation only and is
different from actual indications.
NOTE
• 00:00 A.M. – 12:00 A.M. = 00:00 – 12:00
• 00:00 P.M. – 12:00 P.M. = 12:00 – 24:00
TRANSMITTER
9
Sends signals to the receiver of the indoor
unit.
FAN SPEED
INDICATION
11
Indicates the fan speed selected by the fan
speed button. When set at "AUTO", the fan
speed changes automatically according to
12
the difference between the designated
temperature and the room temperature.
13
OPERATION MODE
INDICATION
14
Indicates the current operating mode
15
TIME DISPLAY
Indicates the present time or the timer.
16
TIMER MODE
INDICATOR
17
ON: The air conditioner starts operation at
the designated time.
OFF: The air conditioner stops operation at
the designated time.
TEMPERATURE
INDICATION
Indicates the temperature set by the tem-
perature setting buttons.
TRANSMITTING
INDICATION
Lights up when a signal is sent.
TEMPERATURE
SETTING BUTTONS
The setting temperature increases
by 1°C (1.8°F) per press.
The setting temperature decreases
by 1°C (1.8°F) per press.
Holding a button changes the temperature
setting quickly.
LOUVER BUTTON
Air flow direction can be changed vertically
(upward and downward) by each press.
FAN SPEED BUTTON
Use to adjust the fan speed. The indication
of the fa speed varies among "L" (Low),
"M" (Medium), "H" (High), and "AUTO"
each time the button is pressed.
OPERATION MODE
BUTTON
Use to change the operating mode. The
indication of the operating mode varies
among (Automatic), (Cooling),
(Dry), (Circulating) and
(Heating) each time the button is
pressed.
TIME ADJ BUTTON
Press the "TIME ADJ" button to adjust the
present time or the timer.
, BUTTONS
Press these buttons to adjust the present
time or the timer.
Forward time
Backward time
Holding a button changes the time setting
in 10-minute intervals.
TIMER FIXING
BUTTONS
Press these buttons to turn the timer ON or
OFF.
SLEEP BUTTON
Press this button for the Sleep setting.
ON/OFF BUTTON
Starts operation with a press: stops opera-
tion with the next press.
4
7