Zibro S1523 Operating Manual page 10

Circulating Operation
Cooling/dry operation
4
10
What is Circulating Operation?
When you use other heating equipment, warmed air accumulates in the upper
space of the room. When the room temperature reaches the temperature set by
the remote controller, the indoor unit starts air circulating operation automatical-
ly to equalize temperature differences between the upper and lower spaces of the
room and consequently improves the heating efficiency.
1. Press the ON/OFF button.
2. Set the operation mode, Circulating
ton.
3. Adjust the setting temperature by pressing the temperature setting buttons.
Circulating Operation begins after the room temperature reaches the tem-
perature set by the remote controller.
4. Adjust the fan speed by pressing the fan speed button. When the MODE is
set at "AUTO", the fan speed changes automatically.
5. Press the ON/OFF button again.The system will retain the previous setting
conditions until next operation.
CAUTION
• Do not place heating equipment right under the indoor unit and the
remote controller.
• Adjust air flow direction to avoid the direct air flow hitting to the
heating equipment.
• Provide adequate ventilation.
1. Press the ON/OFF button
2. Set the operation mode to Cooling
mode button
3. Adjust the setting temperature by pressing the temperature setting buttons.
4. Adjust the fan speed by pressing the fan speed button. When the mode is set
at "AUTO" the fan speed changes automatically.
5. Press the ON/OFF button again. The system will retain the previous setting
conditions until next operation.
, by pressing the operation mode but-
or Dry , by pressing the operation