Zibro S1523 Operating Manual page 6

Air Inlet grill
Remote
Horizontal
Signal
louver***
Receiver
Operating panel
/ POWER
Operating panel
The test operation switch is used as an emergency operation switch.
1. EMERGENCY OPERATION (MANUAL) SWITCH. If the wireless remote controlling system is not available
(when the wireless remote controller is lost or is out of battery), the air conditioning system is able to
continue its operation temporarily.
TEST OPERATION (MANUAL) SWITCH. Test operation is needed in special occasion when you need to
test the "cooling operation" even with the room temperature below 16°C, therefore it is not for the
normal operation at all.
2. POWER/ELECT (POWER INDICATOR). The power indicator lights when the operational ON/OFF of the
remote controller is "ON".
3. TIMER (TIMER MODE INDICATOR). The timer mode indicator lights when timer switch of the remote
controller is in "ON" or "OFF" position.
4. OPERATE (OPERATING MODE INDICATOR). The operating mode indicator lights when the air conditio-
ner is being operated.
Auto recovery function
lf there is any power failure during operation, operation status before power failure is memorized. 3~4
minutes after power recovery, the unit restarts automatically with previous operation status memorized
(3~4 minutes is protective time for compressor).
4
6
Mold-proof Air Filters
* two on each side
Vertical
Air outlet
louver***
*** The air flow direction can be
adjusted with the vertical and
horizontal louvers.
- Beeping sound assures successfull
signal transmission between wire-
less remote and the indoor unit.