Figure 3-7: Example Auto Calibration - Teledyne 7600 Operating Instructions Manual

Infrared Gas Analyzer
Any operation other than "Stop Auto Calibration" (see
Section 3.5.4.5) is not permitted during auto calibration.
"Stop Auto Calibration" cannot be performed when the key
lock is ON.
To cancel auto calibration, set the key lock to OFF and
then execute "Stop Auto Calibration".
Auto Calibration Example
Start Time
Cycle
Flow Time
ON/OFF
Figure 3-7 shows the auto calibration with the above settings.

Figure 3-7: Example Auto Calibration

Teledyne Analytical Instruments
SUN 12:00
1 day
Zero 350 sec
Ch1 Span 350 sec
Ch1 Span 350 sec
Ch1 Span 350 sec
Ch1 Span 300 sec
Ch1 Span 300 sec
EX. time 300 sec
ON
Operation
61