Figure 1-2 Rear Panel Of Model 3010Ma Control Unit - Teledyne 3010MA Operating Instructions Manual

Part 1 Control Unit
• Network—For future expansion. Not implemented at this
printing.
50-Pin Equipment Interface Connector—provides access for:
Alarms—2 concentration and 1 system alarm
Analog Outputs—0-1 Vdc concentration and 0 -1 V dc
range ID. 4-20 mA concentration and optional 4-20 mA
range ID.
Remote Span/Zero—Digital inputs for external control of
analyzer calibration
Calibration Contact—Special contacts to signal that the
instrument is being calibrated and not monitoring sample
Range ID Contacts—Separate, dedicated range relay contacts
for low medium and high ranges

Figure 1-2 Rear Panel of Model 3010MA Control Unit

Teledyne Analytical Instruments
Model 3010MA
18