Cell Replacement; Storing And Handling Replacement Cells - Teledyne 3010PA Operating Instructions Manual

Percent oxygen analyzer

Table of Contents

Maintenance

5.2

Cell Replacement

The Micro-Fuel Cell is a sealed electrochemical transducer with no

electrolyte to change or electrodes to clean. When the cell reaches the end

of its useful life, it is replaced. The spent fuel cell should be discarded

according to local regulations. This section describes storage and handling

of the fuel cell, and when and how to replace it.

To have a replacement cell available when it is needed, it is recom-

mended that one spare cell be purchased, shortly before the end of the cell's

one year warranty period. (Check Specific Model Information in The front

matter of this manual for which class of cell you purchased.)

CAUTION:

Do not stockpile cells. The warranty period starts

on the day of shipment.

The spare cell should be carefully stored in an area that is not subject

to large variations in ambient temperature (75 °F nominal) or to rough

handling.

5-2: Part II

Figure 5-1: Major Components

Models 3010P

Table of Contents

Table of Contents