1 Introduction
Figure 1-2: Model 3010PA Rear Panel
•
Power Connection
•
Analog Outputs
•
Alarm Connections
•
RS-232 Port
•
Remote Probe
•
Remote Span/Zero
•
Calibration Contact
•
Range ID Contacts
1-4: Part I
Universal AC power source.
0-1 V dc concentration and 0-1 V dc
range ID. Optional isolated 4-20 mA dc
and 4-20 mA dc range ID.
2 concentration alarms and 1 system
alarm.
Serial digital concentration signal
output and control input.
Provides all electrical interconnect to
the Analysis Unit or Remote Probe.
Digital inputs allow external control of
analyzer calibration.
To notify external equipment that
instrument is being calibrated and
readings are not monitoring sample.
Four separate, dedicated, range relay
contacts. Low, Medium, High, Cal.
Model 3010
PA