Fiery EX2101 Job Management Manual page 84

3
3-24 Using Command WorkStation or Command WorkStation LE
Text is vertically and horizontally centered on the tab by default. Only positive
N :
OTE
values may be entered for offset.
• Text Rotation, In or Out
Use Text Rotation In if the tabs appear across the top of the document; the text
prints left to right. (This is the most common use.) Use Text Rotation Out if the
tabs are to appear across the bottom of the document; the text prints so that it is
legible when the tab page is turned upside down.
On the right side of the Create Tab Setting dialog box, enter the following:
• Tab offset, which is the distance from the top of the page to the first tab edge
• Page height and width
• Tab width
3. Once you have entered the settings for the template, click OK.
Your new setting now appears in the Tab Media Names scroll box. When you finish
creating or modifying settings, click OK.
T
O MODIFY AN EXISTING TAB SETTING
1. In the Insert Tabs Setup dialog box (see
setting you want to edit and click Modify.
2. In the Modify Tab Media dialog box, enter tab settings and text attributes, as
described on
Once the administrator configures the Insert Tabs settings, users can insert tab pages
into their jobs using Command WorkStation.
*
page 3-23.
page 3-22), select the name of a predefined