Fiery EX2101 Job Management Manual page 44

2
2-18 Introduction to Command WorkStation and Command WorkStation LE
Menu Command
Server Log In/Log Out
Setup*
Manage Font
Insert Tabs Setup*
Align Trays*
Printing Groups*
Reorder Jobs*
Restart Server
Reboot Server
Submenu command
Allows you to log in or log out of the Fiery EX2101 and add
or remove Fiery EX2101 servers from the list.
Opens the Setup options for the Fiery EX2101.
Allows you to download fonts to the Fiery EX2101. You can
also delete fonts that you have downloaded to the
Fiery EX2101.
Allows the Fiery EX2101 Administrator to set up templates
for printing on tab media stock.
Allows you to adjust placement of the printed image on the
page to correct for misalignments of the paper tray.
Allows the Fiery EX2101 Administrator to set up printing
groups and passwords. For more information about Printing
Groups and Secured Print (Member Printing), see the
Configuration
Allows you to reorder the priority of jobs that are waiting to
process or print.
Allows you to restart the Fiery EX2101 without shutting
down the Fiery EX2101 hard disk drive. This command is
available only if you are logged in as Administrator.
N
OTE
log in to the Fiery EX2101 again to reestablish the
connection.
Allows you to restart the Fiery EX2101, after shutting down
the Fiery EX2101 hard disk drive. This command is
available only if you are logged in as Administrator.
N
OTE
log in to the Fiery EX2101 again to reestablish the
connection.
Description
Guide.
: After you restart the Fiery EX2101, you may have to
: After you restart the Fiery EX2101, you may have to