Fiery EX2101 Job Management Manual page 73

3
3-13 Managing job flow
Choose this command
Print
Hold
Process and Hold
Print and Hold
Remove Raster Data
The availability of each command varies, depending on the context of the selected job.
In addition to choosing these commands from the Actions menu, you can issue them
from context-sensitive menus. Activate the Print, Hold, and Process and Hold
commands using the Action buttons.
The following table describes job management commands in greater detail and
explains how each command affects the raster data associated with a job:
To do this
Prints the selected job in the Active Jobs
window, Printed Jobs panel, FreeForm
panel, or Archive panel.
Holds the selected job waiting to process in
the Active Jobs window, or the selected job
in the Printed Jobs or Archive panel, and
marks the job with either the spooled/held
flag or the processed/held flag.
Processes the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag.
Prints the selected job in the Active Jobs
window, Printed Jobs panel, or Archive
panel, and holds a copy of the job. The
copied job is marked with the processed/
held flag.
Removes the raster data associated with the
selected processed/held job in the Active
Jobs window, or with the selected raster job
in the Printed Jobs or Archive panel. Leaves
the original PostScript or PCL data in place.
Raster data is
Temporarily held on the Fiery EX2101 until
the job completes printing.
If raster data is included with the job, held
on the Fiery EX2101 hard disk indefinitely.
Held on the Fiery EX2101 hard disk
indefinitely.
Held on the Fiery EX2101 hard disk
indefinitely.
Deleted.