Fiery EX2101 Job Management Manual page 150

7
7-4 Fiery WebSpooler and Fiery Spooler
In the Fiery WebSpooler window, the background color for the yellow and white
N :
OTE
printer icons is the same.
Spooled jobs
files stored on the Fiery EX2101 hard disk drive. These jobs were sent to either the
Print queue (white icons) or the Hold queue (yellow icons).
—Jobs listed in the area below the RIP status bar are ready to print. They
RIPped jobs
have been rasterized (RIPped, or processed for printing) and are waiting, in order, for
access to the printer. Rasterized jobs can also be held; held jobs are indicated by a
yellow icon.
—Jobs listed in the area below the Print status bar have already been
Printed jobs
printed. Printed jobs can be stored on the Fiery EX2101 hard disk drive. The number
of jobs you can store (from 1 to 99) is defined in Setup.
If you are logged in as Administrator or Operator, you can interact with a job wherever
it appears in the window by selecting it and choosing a command from the Job menu,
or by double-clicking the job and setting override options. For more information, see
"Manipulating job options and job flow"
—Jobs with an error are shown in red. To display the error, double-click the job.
Errors
Note that you cannot check the job properties or hold a job with an error.
If your job does not appear anywhere in the Fiery WebSpooler window, it may
N :
OTE
have already printed; if so, it appears in the Job Log. To view the Job Log, choose Show
Job Log from the Window menu. For more information on the Job Log, see
If the job does not appear in the Job Log, it may have been moved to the Archive
window by the operator. The Archive window cannot be viewed with Fiery
WebSpooler. To check this, you must contact the operator or go to the Command
WorkStation screen.
—Jobs listed in the area below the Spool status bar are PostScript or PCL
on page 7-5.
page 7-17.