Fiery EX2101 Job Management Manual page 76

3
3-16 Using Command WorkStation or Command WorkStation LE
3. To override a setting, expand the blue bar for that print setting category and specify
Indicates reRIPping is required
4. To print the current list of print settings on a local printer, click Print Properties.
5. To apply the print setting overrides to the selected job, click OK.
The user Instructions and Notes fields also appear in the Job Properties dialog box.
• Instructions fields are intended to be viewed and annotated by the operator, but
their contents are associated with the job and are deleted when the job is deleted
after printing.
• Notes fields can be viewed but not changed by the operator. Their contents are
transcribed to the Job Log just as the user sent them.
Some print options available in the printer driver are not displayed in the Job
N :
OTE
Properties dialog box. For information about specific print options and settings, and
where you set them, see Appendix A of the
the desired setting.
To retain a copy of the job with its original settings, duplicate the job and
N :
OTE
rename the duplicate before you change any settings.
For some options, changing the setting requires that the job be reRIPped. These
N :
OTE
options appear with an icon to the left of the option name.
Printing Guide.